S1 6S — FPV controller flight stack

Available on backorder

S1 6S — польотний стек на базі STM32F405 з ESC на 65 А та прошивкою AM32, виготовлений у країнах НАТО. Підтримує Betaflight і ArduPilot, живлення 4S–6S та оснащений 6-осьовим IMU ICM-42688-P, барометром і пам’яттю Blackbox.

Description

  • Manufactured in NATO-aligned countries
  • Powered by AM32 Software in partnership with Alka Motors
  • Betaflight-compliant

Leading-level components:

  • High-precision electronics – European STM32F405 & STM32F051 guarantee stability and accuracy of operation
  • Reliability Built In – Each module is tested to standards compatible with NATO requirements, which guarantees durability and stable operation.
  • Modern sensors – Guaranteed high accuracy with ICM-42688-P, BMP280/DPS310 barometers, QMC5883 magnetometers

 

Delivery set:

  • Плата FC — 1 шт.
  • Плата ESC — 1 шт.
  • Конденсатор Low-ESR 1500 µF / 35 V — 2 шт.
  • Розʼєм XT60H з кабелями 12 AWG — 1 шт.
  • Кабель JST-SH 1.0 мм, 8-pin, 40 мм — 1 шт.
  • Нейлонові гайки M3 — 4 шт.
  • Силіконові O-кільця M3 — 8 шт.
  • Силіконові демпфери M3×8 мм (для FC) — 4 шт.
  • Силіконові демпфери M3×6.6 мм (для ESC) — 4 шт.
  • Гвинти M3×30 мм під шестигранник (Allen) — 4 шт.

Technical specifications

Processor

NDAA compliant, European chipset

Flight controller

STM32F405 (supports Betaflight and ArduPilot)

ESC

STM32F051 (AM32 firmware)

Maximum continuous current

65A

Input voltage

4S–6S (12–26 V)

Filtered power lines with voltage selection

5V/12V/direct battery power supply

Integrated SPI Flash memory

Blackbox log, 128 Mbit, no moving parts

High-speed logging support

Gyroscope, PID, system telemetry

Measurement

VBAT, IBAT, RSSI inputs

ExpressLRS (ELRS)

Serial RX on UART2

SBUS / IBUS / CRSF

Compatible via one port

SmartPort / Crossfire Telemetry

Via UART3 or UART5

Bluetooth module

External module support on UART4 (MSP data pass-through)

Four motor outputs

DSHOT protocol

Servo drives (2 outputs)

Supported

MOSFET output

Assignable via PINIO (up to 300 mA)

Dual PINIO (GPIO)

Configurable input/output

LED indicators

LED0 / LED1

Programming mode

BOOT button / BTN1

Dual camera support

Hardware switch (CAM_SEL pin – PC15)

Camera control

PWM for remote camera activation or menu control

Camera power

5V / 12V, up to 2A

Power filters

On each video system power line

Built-in OSD

Verified AT7456E chipset

6 UART ports

• UART1 — VTX
• UART2 — RC input (ELRS / SBUS / CRSF)
• UART3 — user
• UART4 — GPS
• UART5 — user
• UART6 — user

I²C bus

3.3V power support

6-axis IMU

ICM-42688-P (gyroscope + accelerometer)

Barometer

BMP280 or DPS310

Magnetometer

Support for external QMC5883 module (custom firmware possible)

Weight

FC – 12 g
ESC – 24 g

Dimensions

FC – 40 мм * 49.5 мм
ESC – 46.5 мм * 52.5 мм

// COMPATIBLE PRODUCTS

Write to us

REQUEST A QUOTE

Describe the task, the required categories or products, the estimated quantity and the desired timeframe. The STECH team will prepare an individual offer.

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.